Telescopic boom gives more outreach and lifting height, which helps to load and reaching a lot.

The hydraulic self-levelling system keeps the position of the attachment the same in relation to the ground.

Boom floating system allows free up and down movements of the boom.

On the hydraulic quick attachment plate the locking pins move hydraulically and are operated from the cockpit.

The joystick facilitates operation of auxiliary hydraulics and speeds up work considerably.

Telescopic boom and auxiliary hydraulics functions on the loader can be equipped with electric solenoid valves and operated with switches on the joystick.

Opticontrol makes it possible to operate both the electric and the hydraulic functions of the attachment with the rocker switches on the control switch pack.

Electric functions of rear-mounted attachments can be controlled with this control switch pack.

For older Avant models, where the socket of the attachment control switch pack is not in the multi-connector system.

Rear auxiliary hydraulics outlet enables operation of some hydraulically operated attachments in the rear.

Mount either an extra auxiliary hydraulics outlet to the front or a rear auxiliary hydraulics outlet in addition to the standard multi connector system.

The drive release valve allows free hydraulic oil flow between all four hydraulic drive motors.

Anti slip valve positively diverts oil flow between the hydraulic drive motors, forcing each wheel to turn at practically the same pace.

Snow chains improve traction when driving on snow and ice.

Rear mud guards are a factory option, not possible to mount afterwards.

The kit consists of headlights, blinkers, beacon, reflectors and warning triangle in the rear.

Wheel weights are recommended especially for very uneven terrains and/or forest conditions.

The bracket makes it easier to tie down the loader on a trailer, truck etc.

A simple bracket, that makes it easier to tie down the machine during transport.

The kit includes all necessary slings and instructions for lifting a loader equipped with ROPS frame.

The kit includes all necessary lifting chains, hooks, brackets, and instructions for lifting a loader equipped with cab LX/DLX.

Lightweight aluminium ramps make it is easy to drive your AVANT on to the trailer or van.

Very useful and recommended for machines that are used seasonally or remain unused for longer periods of time.

Equipped with a connector where you can connect a cigarrette lighter plug, for instance when using a mobile phone charger.

Adapter plug to 12V outlet. You can connect the electric wires of a 12V electric appliance to this adapter.

Avant weather cover will protect machine cockpit against rain, snow, dust and other dirt.

Protects the entire Avant loader during transports on an open trailer or truck.

AVANT cab L is an excellent and economical choice when the operator wants to have protection against rain, wind and snowfall.

Facilitates starting when ambient temperature is below freezing point, and reduces fuel consumption and emissions in cold conditions

The 29 kg weights keep the loader more stable when there is a heavy load in the bucket.

There are two types of trailer couplings available both can be mounted either directly on the rear bumper or on the extra back weight.

Rear guard covers and protects the rear part of the machine.

Equipment box which is bolted onto the rear bumper of the machine. The lid can be locked if necessary.

Rear carrier which can be tilted

Rotating warning beacon mounted on a tiltable socket and is easy to install and take off.

Beacon light bar is available for DLX cabs instead of the regular beacon.

The suspension seat is optional equipment on 200 and 400 series. It is equipped with armrests, seat belt, and heater.

Allows the driver to operate the forward-reverse drive from a switch on the joystick or use the standard pedals.

Reverse beeper warns with a distinct sound while reversing the loader.

Heavy duty covers are recommended for extreme operating conditions like demolition and heavy construction jobs.

The exhaust purifier can be mounted instead of the standard exhaust muffler. It reduces diesel engine emissions.

The rear side weights come as a pair, one for each side of the machine. Their weight is 180 kg (90 kg each).

The rear side weights come as a pair, one for each side of the machine. Their weight is 80 kg (40 kg each).

Makes it possible to mount and transport attachments in the rear.

The machine can also be equipped with a light rear bumper instead of the standard integrated rear weight. This reduces machine weight by 150 kg.

An excellent and economical choice when the operator wants to have protection against rain, wind and snowfall.

Rear wall with a window is mounted directly on the ROPS safety frame.

AVANT cab LX is the right solution when a cab with heater is required. The completely new cab LX is more spacious and offers better operator comfort than the previous model.

The best cab option of Avant. The starting point of the design of the DLX cab with heater and radio was to further improve the ergonomics and driver’s working conditions.

The rapid charger speeds up charging of the lithium-ion battery of e6 considerably compared with the standard built-in 230V/10A battery charger.

The work light kit can also be mounted on cab LX, with the same 700 lumen or 2500 lumen lights.

The completely new cab GT for Avant 800 series is mounted with rubber mounts on the chassis, which means very low vibrations and noise level in the cab.

Complete battery pack for Avant e5, AGM battery, 285 Ah, 48V.